Description:For
making tanged metal sheet. It is efficient with double line
needle. Change single needles easily, and low cost. Dia. Of
needle: ¦µ1.2mm, ¦µ1.5, for complex sheet thick.1.2~1.6mm...Click
For Details
Complex Sheet Calendar
Description:To
compound graphite, asbestos and non-asbestos etc
non-metallic sheet reinforced with tanged or smooth metal
foil insertion. Roller Dia.300mm is normal for width 1000mm,
and dia.350mm or 400mm for width...Click
For Details
Large Winder for SWG (Horizontal Style)
Description:Can
make SWG with or without inner & outer ring, needn¡¯t complex molds. Work
pressure is changed with dia. Size controlled by air pump. Horizontal
style is suitable roomy...Click
For Details
Eyelets Metal Tape Shaper
Description:Forming
flat metal tape into U profile for eyelets of cutting
gaskets The speed can be adjusted....Click
For Details
Eyelets Wrapping Machine
Description:Fixing
U profile metal tape to inner or outer border of gasket by
roller. The metal eyelets can offer special protection
against blowout and chemical attack, also improve
seal-ability due to the local higher stress under eyelets...Click
For Details
Metal Jacketed Machine for DJ
Description:For
making double jacketed gasket This machine can finish making
U profile and then planish metal segment or gaskets with
filler and cover board. It needs small rollers /moulds for
different sealing width....Click
For Details
Soft Gasket Cut Machine
Description:to
cut soft non-metal gasket in any shape...Click
For Details
HYDROLIC POWER PRESS FOR CUT GASKET
Description:For
cut non-metallic and semi-metallic...Click
For Details
